01559 363277  Email us

Cooker Extractor Hoods

Items 1 to 10 of 27 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  • AGA Masterchef XL Cooker Hood - Extractor Hood

    AGA Masterchef XL Cooker Hood is the perfect accompaniment for the AGA Masterchef XL Range Cooker - Gas or Induction. The AGA Extraction Hood efficient removes cooking smells and fumes from the kitchen. 

    Recirculation or Ducting System Extractor

    Choose from a recirculation model which is ideal if no outside wall is available, you can operate the cooker hood in recirculation mode. Or you can opt for the Ducting System - in the extraction mode the cooking fumes enter the cooker hood through the filters and taken out through the ducting to the outside. If you are venting you hood to the outside you will need to use the ducting kit which is included. 

    Extractor Hood features:

    • 110cm hood
    • Gloss Black finish
    • Chrome front rail
    • Light
    • 3 speed fan
    • Recirculation or ducting system mode
    • AGA Contemporary badge.
    Learn More
    Available through our retail outlets
  • Falcon Built in Hood Extractor FM900

    Falcon FM900 Built in Hood is a stainless steel cooking extractor perfect for kitchen designs where you don’t want the hood as a main feature but neatly tucked away. The Falcon FM900 built in extraction canopy is perfect for a minimalistic look and where the kitchen furniture is the main element.

    Key features

    • Extraction rate of 1000m cubed/hr
    • Only available as a 900mm wide unit
    • Should be fitted a minimum of 650mm and
    • maximum of 900mm from the hob.
    • The extractor has 6 push-buttons which illuminate when selected.
    • Two 20 watts halogen lights
    • Four variable speed settings
    • Maximum noise level 59dBA
    • 900mm (w) x 292mm (d)
    Learn More
    Available through our retail outlets
  • Falcon Built in Hood FEXT72 – Extractor

    Falcon Built in Extractor Hood to go with your Falcon Range cooker appliance is ideal for kitchen designs where you have kitchen units as the main features rather than a cooker hood.  The FEXT72 built in extractor from Falcon is in stainless steel only and has a width of 720mm. The built in hood has variable settings for low to high levels of intensity which can be operated by remote control or a built in push button panel.

    Falcon built in extractor features

    • Extraction rate of 870m cubed/hr
    • baffle filter (optional charcoal filters available)
    • Two 35 watt integrated halogen spotlights
    • Clean filter indication
    • Should be fitted a minimum of 800mm from the Falcon hob
    • Only available as a 720mm wide unit

    Dimension - (W) 720x (D) 400 x (H) 550 – 175
    Light type – 2 x 35w
    Motor – 230w
    Total power - 230v
    Power requirement - 220- 240V Single phase
    Duct size - 150 - 120mm with reducer flange
    2 x Stainless steel baffles

    Decibal rating

    Setting 1 - 46Dba(@1m)
    Setting 2 - 55Dba(@1m)
    Setting 3 - 60Dba(@1m)
    Setting 4 - 64Dba(@1m)
    Setting 5 - 70Dba(@1m)

    Learn More
    Available through our retail outlets
  • Falcon Contemporary Cooker Hood – 1090 and 900

    Falcon Contemporary Hood for extraction in the kitchen suitable for all Falcon range cooker appliances. The Falcon Contemporary Cooker Hood comes in two sizes the 1090mm and 900mm and the in the falcon colours and trims to match your cooker. The Falcon Contemporary 1090 Hood is ideal to go with the Falcon 1092 Deluxe, CKR, Continental, and Falcon 1000. The Contemporary Hood has powerful extraction of rate of 1000m cubed/hr with four variable speed settings. This hood also comes with a handy automatic fan off when extractor if there is no operator action for 4hours.

    Falcon contemporary hood features

    • Available in 900 and 1092 widths
    • Powerful extraction rate of 1000m cubed/hr
    • Four variable speed settings
    • New configuration for optimum hob lighting
    • Grease filter timer alarm
    • Auto fan off if no operator action for 4 hours
    • Three years parts and labour warranty
    • Two 20 watt integrated halogen spotlights

    Dimensions - (W) 900/1090x (D) 550 x (H) 550 – 950
    Light type – 2 x 20w
    Decibel rating/Setting 1 - 56Dba(@1m)
    Motor – 250W
    Total power – 290W
    Power requirement - 220- 240V Single phase
    Duct size – 150mm

    Learn More
    Available through our retail outlets
  • Falcon Super Extract Hood

    Falcon Super Extract Hood is a powerful cooker extractor to go with your Falcon range cooker. The Super Extract Hood comes is range of stylish colours and trims which makes this hood stylish as well as practical.

    Key features

    • Available in 900, 1000 and 1092 widths
    • Powerful extraction rate of 1000m cubed/hr
    • 10 minute delayed 'fan off' to clear residual fumes
    • Four variable speed settings
    • Dishwasher safe aluminium foil grease filters with built-in 
    • filter saturation warning after 200 hours of use
    • Grease filter timer alarm
    • Choice of colours and trim
    • Two 20 watt integrated halogen spotlight
    • Extendable chimney length for a made to measure finish

    Dimensions - (W)900-1092x (D) 550 x (H) 680-970
    Light type – 2 x 20w
    Decibel rating/Setting 1 - 56Dba(@1m)
    Motor – 250W
    Total power – 290W
    Power requirement - 230V Single phase
    Duct size – 150mm

    Learn More
    Available through our retail outlets
  • Falcon Super Flat Cooker Hood

    Falcon Super Flat Hood from Falcon appliances is designed to cope with powerful generated heat from range cookers. The super flat model comes in black or stainless steel for a stylish and modern kitchen design.

    Key features

    • Available in 1100mm width
    • Powerful extraction rate of 1000m3/hr
    • Operated by electronic push buttons
    • Three variable speed settings plus power boost
    • Dishwasher safe aluminium foil grease filters
    • Two 20 watt integrated halogen spotlights

    Dimensions - (W)1098mm (D) 490mm x (H) 670 mm/1000 mm.
    Light type – 2 x 20w
    Decibel rating/Setting 1 - 56Dba(@1m) setting 2 - 69 Dba(@1m)
    Motor – 300W
    Total power – 400W
    Power requirement - 220- 240V Single phase
    Duct size – 150mm

    Learn More
    Available through our retail outlets
  • Mercury 1000 Pitched Canopy Extraction Hood

    Mercury 1000 Pitched Canopy (PC) Cooking Extractor designed to be fitted with the Mercury 1000 Range Cooker.

    Available in all 8 colours to match your Mercury cooker which include:

    • Snowdrop
    • Truffle
    • Oyster
    • Liquorice
    • Blueberry
    • Ash black 
    • Stainless Steel 
    • Purple haze

    Mercury 1000 PC Hood details

    Duct size - 150mm diameter

    Light type - 2 low voltage halogen spotlights 12v 20w each

    Dimensions - 990mm (w) x 620mm (d)

    Weight - 31kg

    Power supply - 230v 50Hz 3A single phase

    Blower Airflow nominal 1000m3/hr

    3 years warranty

    Learn More
  • Mercury 1000 Slab Canopy Extraction Hood

    Mercury 1000 Slab Canopy (SC) Cooking Extractor designed to be fitted with the Mercury 1000 Range Cooker.

    Available in all 8 colours to match your Mercury cooker which include:

    • Snowdrop
    • Truffle
    • Oyster
    • Liquorice
    • Blueberry
    • Ash black 
    • Stainless Steel 
    • Purple haze

    Mercury 1000 SC Hood details

    Duct size - 150mm diameter

    Light type - 2 low voltage halogen spotlights 12v 20w each

    Dimensions - 990mm (w) x 620mm (d)

    Weight - 31kg

    Power supply - 230v 50Hz 3A single phase

    Blower Airflow nominal 1000m3/hr

    3 years warranty

    Learn More
  • Mercury 1082 Pitched Canopy Extraction Hood

    Mercury 1082 Pitched Canopy (PC) Cooking Extractor designed to be fitted with the Mercury 1082 Range Cooker.

    Available in all 8 colours to match your Mercury cooker which include:

    • Snowdrop
    • Truffle
    • Oyster
    • Liquorice
    • Blueberry
    • Ash black 
    • Stainless Steel 
    • Purple haze

    Mercury 1082 PC Hood details

    Duct size - 150mm diameter

    Light type - 2 low voltage halogen spotlights 12v 20w each

    Dimensions - 1082mm (w) x 620mm (d)

    Weight - 31kg

    Power supply - 230v 50Hz 3A single phase

    Blower Airflow nominal 1000m3/hr

    3 years warranty

    Learn More
  • Mercury 1082 Slab Canopy Extraction Hood

    Mercury 1082 Slab Canopy (SC) Cooking Extractor designed to be fitted with the Mercury 1082 Range Cooker.

    Available in all 8 colours to match your Mercury cooker which include:

    • Snowdrop
    • Truffle
    • Oyster
    • Liquorice
    • Blueberry
    • Ash black 
    • Stainless Steel 
    • Purple haze

    Mercury 1082 SC Hood details

    Duct size - 150mm diameter

    Light type - 2 low voltage halogen spotlights 12v 20w each

    Dimensions - 1082mm (w) x 620mm (d)

    Weight - 31kg

    Power supply - 230v 50Hz 3A single phase

    Blower Airflow nominal 1000m3/hr

    3 years warranty

    Learn More

Items 1 to 10 of 27 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3